Jason's Works 瑞典式缠绕高杆冲头套装，#1–#3

该三件套高杆冲头由 Jason's Works 设计，用于瑞典包裹硬币戒指技术，帮助您从较大的硬币制作较小的戒指——为您的瑞典包裹硬币戒指套件增加更多尺寸选择。这些黄铜冲头带有标记线，便于指示冲头在向下压入缩小模具（单独销售）时的移动。 按照常规开始制作硬币戒指的过程，使用 Jason's Works 工具和戒指拉伸器（单独销售）冲压、折叠并缩小硬币。然后，用多层特氟龙®胶带包裹戒指，并将其放入瑞典包裹缩小模具中。使用黄铜冲头和压力机将硬币推入模具，随着戒指直径变小，叠加多个冲头，直到达到所需的缩小程度。 Start the coin ring making process as usual, by punching, folding and reducing the coin with your Jason's Works tools and ring stretcher (available separately). Then, wrap your ring with several layers of Teflon® tape and set it into a Swedish Wrap reduction die. Use your brass plunger and your press to push the coin into the die, stacking multiple plungers as the ring diameter becomes smaller until the desired amount of reduction is achieved.

• 运输重量： 19.57 盎司 (554.8g)
• 原产国： 美国
• 重量： 0.555 kg